Auxiliaries

Screen recuperator to dissolve in 5 liters of water.Odor free and degradable. You can erase the emulsion from the screen printing screens to reuse them and thus extend their life...

Adhesive spray glue that allows us to glue the textile garment to the base where we are going to print, it will help the garment not move and thus we...

Softening liquid that helps us to increase the drying time of the water-based textile ink on the screen. It works on different types of Lacquers.We recommend using between 10 and...

Adhesive spray that allows us to glue the textile garment to the base where we are going to print, it will not allow the garment to move and thus we...

Saati is one of the world's best known brands of specialty chemicals for screen printing. We are lucky to be distributors of some products from their catalog that will make...

Degreaser for screens and screen printing fabrics. Before emulsifying a reused screen, it is recommended to clean and degrease previously to avoid possible problems in the emulsification.   Applying a very...

Spray to blacken laser toner prints, applicable on polyester or acetate.It is sprayed at approximately 25cm with rapid and even movements. Apply on the photolith vertically, never horizontally.

The liquid catalyst helps to strengthen the lacquers, makes it harder and holds more to the threads of the garment. Recommended for synthetic garments such as polyester, sportswear.It is recommended...

Retardant indicated for paper inks and pvc inks. Helps dilute water-based inks to prolong use during printing and prevent drying on the screen. It makes printing easier and makes the...

Abezeta paper for laser printer, for photoliths and screen printing positives. 100 units A3 size Transparent or Matte paper100 micron transparent96 micron matte

Powder bleach to apply in Rongeant / Discharge inksApply 70gr per Kg of ink.Once the bleach has been mixed with the discharge ink base, it has a shelf life of...

Special silicone paper for transfer printing with plastisol paints.Double-sided transfer paper.Size: 70cm x 100cm

Adhesive powders to carry out a transfer screen printing process with paints plastisol. How to use:Once the stamping is pre-dried, sprinkle the transfer powders over the paint until it is...

Rubber for squeegee handles. Perfect for renewing the rubbers of your aluminum or wooden scrapers. Profile 8mm thick and 4cm high Straight tip Hardness 65 Sh Red 75 Sh Green...

Abezeta paper for laser printer, for photoliths and screen printing positives. 100 units A3 size Transparent or Matte paper100 micron transparent96 micron matte